Product lifecycle management
What is PLM?
PLM stands for product lifecycle management. It is a methodology, enabled by technology: a way of looking after everything about a product, from the first idea to its final disposal, made practical by the software and systems that connect it all. The idea is the full cycle, often called cradle to grave.
A methodology, enabled by technology
Every product has a life. It starts as an idea, becomes a design, is tested, built, sold and serviced, and is eventually retired. At every stage different people make decisions and create information: requirements, drawings, parts lists, test results, supplier details, repair records.
PLM is the discipline of managing all of that as one story instead of many separate ones. It answers questions such as: which version of the design did we actually build? What changed, and who approved it? Which customers have the affected units? What can we reuse in the next product?
The methodology comes first. It means agreeing how information is created, approved and shared across the whole lifecycle, and with the suppliers and customers beyond your own walls. It is as much about how a business works as about what it makes.
Technology is what enables it. With thousands of parts, hundreds of people and many sites, nobody can run that methodology on spreadsheets and email. PLM software, and the tools connected to it, hold the single record, control every change and give the right people the right information. Neither half works alone: a methodology without technology cannot scale, and technology without the methodology is just an expensive filing cabinet.
You will often hear “PLM” used for the software too, and that is fine. When a company says it is implementing PLM, it usually means both: the way of working and the system that enables it.
Three ideas at the heart of it
- AccessEveryone who needs product information can reach it, securely, in one agreed place.
- IntegrityThat information stays accurate and trustworthy for as long as the product lives.
- ProcessThe ways information is created, approved and shared are managed as carefully as the information itself.
Based on the definition from the analyst firm CIMdata.
The full 360 degrees, from cradle to grave
PLM covers the whole circle. The loop closes because what is learnt when a product is retired, and what went wrong in service, becomes the starting point for the next one.
- 1
Concept
Someone spots a need. Market research, customer needs and feasibility decide which ideas are worth pursuing, and the requirements are written down.
- 2
Design
Engineers turn the idea into 3D models, electronics, software and a bill of materials. Designs are simulated and tested before anyone commits to making them.
- 3
Make
Manufacturing plans, suppliers and factory instructions are created from the approved design, and every change is controlled.
- 4
Service
The product is sold, used, repaired and upgraded. What happens in the field is recorded against the design it came from.
- 5
Retire
At the end of its life the product is taken back, recycled or disposed of, and what was learnt feeds the next concept.
Where the software comes in
Because the lifecycle is so wide, a whole industry of software has grown up to enable it. Each of the well-known PLM platforms tries to provide a digital thread across the entire lifecycle, and each does it in its own way.
In practice no single product does everything. Most companies run a PLM platform at the centre and connect other systems to it. Making that work is a large part of what PLM professionals are hired to do.
The digital thread
Picture a thread stitched through every stage of the lifecycle. Pull it anywhere and you can follow it back to the requirement that started it, forward to the factory, and out to the product in a customer's hands.
A requirement links to the design that meets it. The design links to its parts list, the parts to their suppliers, the build to a serial number, and the serial number to its service history. Everyone works from the same current facts, and nobody has to rebuild the story by hand.
What a good thread lets you answer
- If we change this part, what else is affected?
- Which design revision is in this unit on the shop floor?
- Can we prove this product met the regulations when it shipped?
- What did the last product teach us that this one should use?
The building block of the digital twin
A digital twin is a virtual model of one specific product or asset, kept up to date with data from the real thing: a single wind turbine, say, or one aircraft engine. Twins can also model a process, such as a production line.
For a twin to be trusted it must know exactly what it is a copy of: which design revision, which parts, which changes were made. That record is the digital thread. The thread gives the twin its identity and its history, and sensors give it live behaviour. Without the thread, a twin has no reliable record of what it is a twin of.
Where data is created
Authoring tools
- Mechanical CAD
- Electronics design
- Simulation
- Software engineering
The connected record
PLM: the digital thread
- Structure and BOMs
- Versions and change
- Configurations
- Traceability
Where data is used
Business and factory
- ERP
- Manufacturing
- Quality
- Service
Built on the thread
The digital twin
A live virtual copy of one real product or asset. The thread tells it what was built. Data from the real thing tells it what is happening now.
The tools that plug into PLM
Most product data is not created inside PLM. It is created in specialist authoring tools, then connected to PLM so it can be versioned, controlled and shared. Companies rarely lack systems. They have many, each holding part of the truth, and the connections between them (often called connectors) are what turn them into one thread. Each group below plugs into the platform in a different way, and each needs people who understand both sides of the connection.
Mechanical CAD
3D models and drawings of parts and assemblies.
- CATIA
- NX
- Creo
- SOLIDWORKS
- Inventor
- Solid Edge
Electronics design
Circuit boards, schematics and their libraries.
- Altium Designer
- Cadence Allegro
- Xpedition
- Zuken
Simulation
Testing designs on a computer before anything is built.
- Ansys
- Simcenter
- SIMULIA
Software and systems engineering
Requirements, code and the software inside the product.
- Codebeamer
- Polarion
- Jama Connect
Manufacturing planning
How the product will be built, and where.
- Tecnomatix
- DELMIA
- Opcenter
Business systems
Orders, stock, suppliers and finance.
- SAP S/4HANA
- Oracle
- Infor
These are examples, not a complete or ranked list. Product names belong to their respective owners.
In the vendors' own words
Every major PLM company explains the subject from its own point of view. These are the articles they publish on what PLM is and what a digital twin is. On the link between the two, PTC describes unifying the data in a digital thread as “a necessary pre-requisite to building a true digital twin”.
Siemens
- What is PLM? (opens in a new tab)What is PLM? A guide on Product Lifecycle Management
- What is a digital twin? (opens in a new tab)Overview: What is Digital Twin Technology?
PTC
- What is PLM? (opens in a new tab)What Is PLM? Product Lifecycle Management
- What is a digital twin? (opens in a new tab)What is Digital Twin and why is it important?
Dassault Systèmes
- What is PLM? (opens in a new tab)What is Product Lifecycle Management
- What is a digital twin? (opens in a new tab)Digital Twin: What's The Big Deal?
SAP
- What is PLM? (opens in a new tab)What is product lifecycle management (PLM)?
- What is a digital twin? (opens in a new tab)How digital twins are driving the future of business
Oracle
- What is PLM? (opens in a new tab)What Is PLM Software?
- What is a digital twin? (opens in a new tab)Seeing Double: Digital Twins Connect the Physical and Virtual Worlds
Aras
- What is PLM? (opens in a new tab)What is PLM? Product Lifecycle Management Meaning
- What is a digital twin? (opens in a new tab)What Is a Digital Twin? Definition, Explanation and Example
Autodesk
- What is PLM? (opens in a new tab)What is PLM? Product Lifecycle Management
- What is a digital twin? (opens in a new tab)What is a digital twin? How intelligent data models can shape the built world
Infor
- What is PLM? (opens in a new tab)What is Product Lifecycle Management (PLM) Software?
- What is a digital twin? (opens in a new tab)The Value of Digital Twins in Manufacturing
Arena (PTC)
- What is PLM? (opens in a new tab)What Is PLM (Product Lifecycle Management)
- What is a digital twin? (opens in a new tab)Digital Twin Definition
Centric Software
- What is PLM? (opens in a new tab)What is Product Lifecycle Management (PLM) Software?
Propel
- What is PLM? (opens in a new tab)Product Lifecycle Management (PLM)
- What is a digital twin? (opens in a new tab)Digital Twin
CONTACT Software
These links open each company's own website in a new tab. We are not paid for them, and the views are the companies' own.
Where the careers are
The people who set up, connect and look after this joined-up record are PLM administrators, developers, integration specialists, solution architects and consultants. Employers around the world are hiring for them now.